UNDER-DOOR DRAFT STOPPER · 93 CM

Stop The Draft At The Floor

A soft PVC profile with a felt seal that slips under the door, folds around both edges and holds with adhesive. No drilling, no screws, no gap left for cold air.

93 cm length • Fits 3.5–5.5 cm doors • Felt seal

WHY IT WORKS

Cold Air Comes In Low

The gap under a closed door is usually 0.3 to 2.6 cm — a thin line you stop noticing, but it carries cold air, dust and noise from the next room. A soft profile that presses against the floor closes that line without stopping the door.

01 / THE FIT

Three Numbers To Check

Door thickness, floor gap and door width. The stopper adjusts from 3.5 to 5.5 cm across the door and covers a gap of roughly 0.3 to 2.6 cm. Measure before you order — a fit that is too tight adds drag.

02 / THE BUILD

Soft Outside, Felt Underneath

The body is a soft PVC profile that folds around the bottom edge of the door, with adhesive on the inner faces. The lower edge carries a felt strip that meets the floor, so the seal flexes instead of scraping.

03 / CUT AND STICK

Trim First, Then Peel

Push the stopper under the door, mark the width, then cut it to length with scissors before you take the liner off. Once the adhesive is exposed it grabs quickly, so get the position right the first time.

04 / FITTING

Six Steps, No Tools

Wipe the door clean and dry. Slide the stopper under, measure and trim. Peel the protective film, press the profile onto both faces of the door, fold it closed and let the adhesive set before the door is used as usual.

05 / WHERE IT HELPS

Bedroom, Bathroom, Office

Any interior door with a gap under it: a bedroom that faces a corridor, a bathroom that lets steam into the hall, a home office where every conversation carries. On smooth tiles, wood or vinyl it glides; on thick carpet the felt will drag, so keep the profile slightly clear of the pile.

PRODUCT DETAILS

Every Detail, Listed

One length, one size, fits most interior doors.

HOW TO FIT IT

Do This In One Sitting

1. Wipe the door face and floor edge clean, then let them dry.
2. Slide the stopper under the door and mark the width you need.
3. Cut the excess off with scissors.
4. Peel the protective film from the adhesive.
5. Press the profile onto both faces of the door and fold it shut.
6. Leave it about a day before using the door as normal.

FEEDBACK

What Homes Say

Notes from customers who fitted one at a bedroom, bathroom or office door.

IN THE BOX

PACKAGE INCLUDES

1 × under-door draft stopper, 93 cm, with adhesive backing and felt seal

READY WHEN YOU ARE

Close The Gap This Week

Tell us the door you want to fix and we send the stopper. You pay the rider when the parcel reaches your door.

SHOP WITH CONFIDENCE

WHY CHOOSE US?

Carefully selected products, clear communication, and support you can reach by phone or WhatsApp. Order today with Free Shipping and Cash on Delivery.